Snp host latest by MelodyHuibo · Pull Request #6 · AMDESE/linux

MelodyHuibo · 2024-06-05T17:36:27Z

No description provided.

Replace open coded functionalify of kstrdup_and_replace() with a call. Link: https://lkml.kernel.org/r/20240213162741.3102810-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Jason Baron <jbaron@akamai.com> Cc: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Found with git grep 'MODULE_AUTHOR(".*([^)]*@' Fixed with sed -i '/MODULE_AUTHOR(".*([^)]*@/{s/ (/ </g;s/)"/>"/;s/)and/> and/}' \ $(git grep -l 'MODULE_AUTHOR(".*([^)]*@') Also: in drivers/media/usb/siano/smsusb.c normalise ", INC" to ", Inc"; this is what every other MODULE_AUTHOR for this company says, and it's what the header says in drivers/sbus/char/openprom.c normalise a double-spaced separator; this is clearly copied from the copyright header, where the names are aligned on consecutive lines thusly: * Linux/SPARC PROM Configuration Driver * Copyright (C) 1996 Thomas K. Dyas (tdyas@noc.rutgers.edu) * Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be) but the authorship branding is single-line Link: https://lkml.kernel.org/r/mk3geln4azm5binjjlfsgjepow4o73domjv6ajybws3tz22vb3@tarta.nabijaczleweli.xyz Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Since commit aed65af ("drivers: make device_type const"), the driver core can properly handle constant struct device_type. Make sure that new usages of the struct already enter the tree as const. Link: https://lkml.kernel.org/r/20240218-device_cleanup-checkpatch-v1-1-8b0b89c4f6b1@marliere.net Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Bring the PDF build fix into docs-next so we can ... build PDFs

…inux/kernel/git/akpm/mm

…ernel/git/arm64/linux

…/git/soc/soc.git

…/git/geert/linux-m68k.git

…/powerpc/linux.git

…/s390/linux.git

…netdev/net.git

…t/bpf/bpf.git

…t/klassert/ipsec.git

…git/wireless/wireless.git

…t/rdma/rdma.git

…/git/tiwai/sound.git

…/git/broonie/regulator.git

…/git/gregkh/tty.git

…/git/gregkh/usb.git

…/phy/linux-phy.git

…kernel/git/wbg/counter.git

…kernel/git/gregkh/char-misc.git

…/westeri/thunderbolt.git

…t/herbert/crypto-2.6.git

…/vkoul/dmaengine.git

…/git/mtd/linux.git

…/cxl/cxl.git

…l/git/kdave/linux.git

…/viro/vfs.git

The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/20240617095543.6971-1-jack@suse.cz Link: https://lkml.kernel.org/r/20240614145243.8837-1-jack@suse.cz Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

A kernel warning was reported when pinning folio in CMA memory when launching SEV virtual machine. The splat looks like: [ 464.325306] WARNING: CPU: 13 PID: 6734 at mm/gup.c:1313 __get_user_pages+0x423/0x520 [ 464.325464] CPU: 13 PID: 6734 Comm: qemu-kvm Kdump: loaded Not tainted 6.6.33+ #6 [ 464.325477] RIP: 0010:__get_user_pages+0x423/0x520 [ 464.325515] Call Trace: [ 464.325520] <TASK> [ 464.325523] ? __get_user_pages+0x423/0x520 [ 464.325528] ? __warn+0x81/0x130 [ 464.325536] ? __get_user_pages+0x423/0x520 [ 464.325541] ? report_bug+0x171/0x1a0 [ 464.325549] ? handle_bug+0x3c/0x70 [ 464.325554] ? exc_invalid_op+0x17/0x70 [ 464.325558] ? asm_exc_invalid_op+0x1a/0x20 [ 464.325567] ? __get_user_pages+0x423/0x520 [ 464.325575] __gup_longterm_locked+0x212/0x7a0 [ 464.325583] internal_get_user_pages_fast+0xfb/0x190 [ 464.325590] pin_user_pages_fast+0x47/0x60 [ 464.325598] sev_pin_memory+0xca/0x170 [kvm_amd] [ 464.325616] sev_mem_enc_register_region+0x81/0x130 [kvm_amd] Per the analysis done by yangge, when starting the SEV virtual machine, it will call pin_user_pages_fast(..., FOLL_LONGTERM, ...) to pin the memory. But the page is in CMA area, so fast GUP will fail then fallback to the slow path due to the longterm pinnalbe check in try_grab_folio(). The slow path will try to pin the pages then migrate them out of CMA area. But the slow path also uses try_grab_folio() to pin the page, it will also fail due to the same check then the above warning is triggered. In addition, the try_grab_folio() is supposed to be used in fast path and it elevates folio refcount by using add ref unless zero. We are guaranteed to have at least one stable reference in slow path, so the simple atomic add could be used. The performance difference should be trivial, but the misuse may be confusing and misleading. Redefined try_grab_folio() to try_grab_folio_fast(), and try_grab_page() to try_grab_folio(), and use them in the proper paths. This solves both the abuse and the kernel warning. The proper naming makes their usecase more clear and should prevent from abusing in the future. peterx said: : The user will see the pin fails, for gpu-slow it further triggers the WARN : right below that failure (as in the original report): : : folio = try_grab_folio(page, page_increm - 1, : foll_flags); : if (WARN_ON_ONCE(!folio)) { <------------------------ here : /* : * Release the 1st page ref if the : * folio is problematic, fail hard. : */ : gup_put_folio(page_folio(page), 1, : foll_flags); : ret = -EFAULT; : goto out; : } [1] https://lore.kernel.org/linux-mm/1719478388-31917-1-git-send-email-yangge1116@126.com/ [shy828301@gmail.com: fix implicit declaration of function try_grab_folio_fast] Link: https://lkml.kernel.org/r/CAHbLzkowMSso-4Nufc9hcMehQsK9PNz3OSu-+eniU-2Mm-xjhA@mail.gmail.com Link: https://lkml.kernel.org/r/20240628191458.2605553-1-yang@os.amperecomputing.com Fixes: 57edfcf ("mm/gup: accelerate thp gup even for "pages != NULL"") Signed-off-by: Yang Shi <yang@os.amperecomputing.com> Reported-by: yangge <yangge1116@126.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: <stable@vger.kernel.org> [6.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

[ Upstream commit 05c200c ] The following handshake mechanism needs be followed after firmware download is completed to bring the firmware to running state. After firmware fragments of Operational image are downloaded and secure sends result of the image succeeds, 1. Driver sends HCI Intel reset with boot option AMDESE#1 to switch FW image. 2. FW sends Alive GP[0] MSIx 3. Driver enables data path (doorbell 0x460 for RBDs, etc...) 4. Driver gets Bootup event from firmware 5. Driver performs D0 entry to device (WRITE to IPC_Sleep_Control =0x0) 6. FW sends Alive GP[0] MSIx 7. Device host interface is fully set for BT protocol stack operation. 8. Driver may optionally get debug event with ID 0x97 which can be dropped For Intermediate loadger image, all the above steps are applicable expcept AMDESE#5 and AMDESE#6. On HCI_OP_RESET, firmware raises alive interrupt. Driver needs to wait for it before passing control over to bluetooth stack. Co-developed-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com> Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Stable-dep-of: 510e838 ("Bluetooth: btintel: Do no pass vendor events to stack") Signed-off-by: Sasha Levin <sashal@kernel.org>

Its used from trace__run(), for the 'perf trace' live mode, i.e. its strace-like, non-perf.data file processing mode, the most common one. The trace__run() function will set trace->host using machine__new_host() that is supposed to give a machine instance representing the running machine, and since we'll use perf_env__arch_strerrno() to get the right errno -> string table, we need to use machine->env, so initialize it in machine__new_host(). Before the patch: (gdb) run trace --errno-summary -a sleep 1 <SNIP> Summary of events: gvfs-afc-volume (3187), 2 events, 0.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ pselect6 1 0 0.000 0.000 0.000 0.000 0.00% GUsbEventThread (3519), 2 events, 0.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ poll 1 0 0.000 0.000 0.000 0.000 0.00% <SNIP> Program received signal SIGSEGV, Segmentation fault. 0x00000000005caba0 in perf_env__arch_strerrno (env=0x0, err=110) at util/env.c:478 478 if (env->arch_strerrno == NULL) (gdb) bt #0 0x00000000005caba0 in perf_env__arch_strerrno (env=0x0, err=110) at util/env.c:478 #1 0x00000000004b75d2 in thread__dump_stats (ttrace=0x14f58f0, trace=0x7fffffffa5b0, fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>) at builtin-trace.c:4673 #2 0x00000000004b78bf in trace__fprintf_thread (fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>, thread=0x10fa0b0, trace=0x7fffffffa5b0) at builtin-trace.c:4708 #3 0x00000000004b7ad9 in trace__fprintf_thread_summary (trace=0x7fffffffa5b0, fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>) at builtin-trace.c:4747 #4 0x00000000004b656e in trace__run (trace=0x7fffffffa5b0, argc=2, argv=0x7fffffffde60) at builtin-trace.c:4456 #5 0x00000000004ba43e in cmd_trace (argc=2, argv=0x7fffffffde60) at builtin-trace.c:5487 #6 0x00000000004c0414 in run_builtin (p=0xec3068 <commands+648>, argc=5, argv=0x7fffffffde60) at perf.c:351 #7 0x00000000004c06bb in handle_internal_command (argc=5, argv=0x7fffffffde60) at perf.c:404 #8 0x00000000004c0814 in run_argv (argcp=0x7fffffffdc4c, argv=0x7fffffffdc40) at perf.c:448 #9 0x00000000004c0b5d in main (argc=5, argv=0x7fffffffde60) at perf.c:560 (gdb) After: root@number:~# perf trace -a --errno-summary sleep 1 <SNIP> pw-data-loop (2685), 1410 events, 16.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ epoll_wait 188 0 983.428 0.000 5.231 15.595 8.68% ioctl 94 0 0.811 0.004 0.009 0.016 2.82% read 188 0 0.322 0.001 0.002 0.006 5.15% write 141 0 0.280 0.001 0.002 0.018 8.39% timerfd_settime 94 0 0.138 0.001 0.001 0.007 6.47% gnome-control-c (179406), 1848 events, 20.9% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ poll 222 0 959.577 0.000 4.322 21.414 11.40% recvmsg 150 0 0.539 0.001 0.004 0.013 5.12% write 300 0 0.442 0.001 0.001 0.007 3.29% read 150 0 0.183 0.001 0.001 0.009 5.53% getpid 102 0 0.101 0.000 0.001 0.008 7.82% root@number:~# Fixes: 54373b5 ("perf env: Introduce perf_env__arch_strerrno()") Reported-by: Veronika Molnarova <vmolnaro@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Veronika Molnarova <vmolnaro@redhat.com> Acked-by: Michael Petlan <mpetlan@redhat.com> Tested-by: Michael Petlan <mpetlan@redhat.com> Link: https://lore.kernel.org/r/Z0XffUgNSv_9OjOi@x1 Signed-off-by: Namhyung Kim <namhyung@kernel.org>

…le_direct_reclaim() The task sometimes continues looping in throttle_direct_reclaim() because allow_direct_reclaim(pgdat) keeps returning false. #0 [ffff80002cb6f8d0] __switch_to at ffff8000080095ac #1 [ffff80002cb6f900] __schedule at ffff800008abbd1c #2 [ffff80002cb6f990] schedule at ffff800008abc50c #3 [ffff80002cb6f9b0] throttle_direct_reclaim at ffff800008273550 #4 [ffff80002cb6fa20] try_to_free_pages at ffff800008277b68 #5 [ffff80002cb6fae0] __alloc_pages_nodemask at ffff8000082c4660 #6 [ffff80002cb6fc50] alloc_pages_vma at ffff8000082e4a98 #7 [ffff80002cb6fca0] do_anonymous_page at ffff80000829f5a8 #8 [ffff80002cb6fce0] __handle_mm_fault at ffff8000082a5974 #9 [ffff80002cb6fd90] handle_mm_fault at ffff8000082a5bd4 At this point, the pgdat contains the following two zones: NODE: 4 ZONE: 0 ADDR: ffff00817fffe540 NAME: "DMA32" SIZE: 20480 MIN/LOW/HIGH: 11/28/45 VM_STAT: NR_FREE_PAGES: 359 NR_ZONE_INACTIVE_ANON: 18813 NR_ZONE_ACTIVE_ANON: 0 NR_ZONE_INACTIVE_FILE: 50 NR_ZONE_ACTIVE_FILE: 0 NR_ZONE_UNEVICTABLE: 0 NR_ZONE_WRITE_PENDING: 0 NR_MLOCK: 0 NR_BOUNCE: 0 NR_ZSPAGES: 0 NR_FREE_CMA_PAGES: 0 NODE: 4 ZONE: 1 ADDR: ffff00817fffec00 NAME: "Normal" SIZE: 8454144 PRESENT: 98304 MIN/LOW/HIGH: 68/166/264 VM_STAT: NR_FREE_PAGES: 146 NR_ZONE_INACTIVE_ANON: 94668 NR_ZONE_ACTIVE_ANON: 3 NR_ZONE_INACTIVE_FILE: 735 NR_ZONE_ACTIVE_FILE: 78 NR_ZONE_UNEVICTABLE: 0 NR_ZONE_WRITE_PENDING: 0 NR_MLOCK: 0 NR_BOUNCE: 0 NR_ZSPAGES: 0 NR_FREE_CMA_PAGES: 0 In allow_direct_reclaim(), while processing ZONE_DMA32, the sum of inactive/active file-backed pages calculated in zone_reclaimable_pages() based on the result of zone_page_state_snapshot() is zero. Additionally, since this system lacks swap, the calculation of inactive/ active anonymous pages is skipped. crash> p nr_swap_pages nr_swap_pages = $1937 = { counter = 0 } As a result, ZONE_DMA32 is deemed unreclaimable and skipped, moving on to the processing of the next zone, ZONE_NORMAL, despite ZONE_DMA32 having free pages significantly exceeding the high watermark. The problem is that the pgdat->kswapd_failures hasn't been incremented. crash> px ((struct pglist_data *) 0xffff00817fffe540)->kswapd_failures $1935 = 0x0 This is because the node deemed balanced. The node balancing logic in balance_pgdat() evaluates all zones collectively. If one or more zones (e.g., ZONE_DMA32) have enough free pages to meet their watermarks, the entire node is deemed balanced. This causes balance_pgdat() to exit early before incrementing the kswapd_failures, as it considers the overall memory state acceptable, even though some zones (like ZONE_NORMAL) remain under significant pressure. The patch ensures that zone_reclaimable_pages() includes free pages (NR_FREE_PAGES) in its calculation when no other reclaimable pages are available (e.g., file-backed or anonymous pages). This change prevents zones like ZONE_DMA32, which have sufficient free pages, from being mistakenly deemed unreclaimable. By doing so, the patch ensures proper node balancing, avoids masking pressure on other zones like ZONE_NORMAL, and prevents infinite loops in throttle_direct_reclaim() caused by allow_direct_reclaim(pgdat) repeatedly returning false. The kernel hangs due to a task stuck in throttle_direct_reclaim(), caused by a node being incorrectly deemed balanced despite pressure in certain zones, such as ZONE_NORMAL. This issue arises from zone_reclaimable_pages() returning 0 for zones without reclaimable file- backed or anonymous pages, causing zones like ZONE_DMA32 with sufficient free pages to be skipped. The lack of swap or reclaimable pages results in ZONE_DMA32 being ignored during reclaim, masking pressure in other zones. Consequently, pgdat->kswapd_failures remains 0 in balance_pgdat(), preventing fallback mechanisms in allow_direct_reclaim() from being triggered, leading to an infinite loop in throttle_direct_reclaim(). This patch modifies zone_reclaimable_pages() to account for free pages (NR_FREE_PAGES) when no other reclaimable pages exist. This ensures zones with sufficient free pages are not skipped, enabling proper balancing and reclaim behavior. [akpm@linux-foundation.org: coding-style cleanups] Link: https://lkml.kernel.org/r/20241130164346.436469-1-snishika@redhat.com Link: https://lkml.kernel.org/r/20241130161236.433747-2-snishika@redhat.com Fixes: 5a1c84b ("mm: remove reclaim and compaction retry approximations") Signed-off-by: Seiji Nishikawa <snishika@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Nvidia's Tegra MGBE controllers require the IOMMU "Stream ID" (SID) to be written to the MGBE_WRAP_AXI_ASID0_CTRL register. The current driver is hard coded to use MGBE0's SID for all controllers. This causes softirq time outs and kernel panics when using controllers other than MGBE0. Example dmesg errors when an ethernet cable is connected to MGBE1: [ 116.133290] tegra-mgbe 6910000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx [ 121.851283] tegra-mgbe 6910000.ethernet eth1: NETDEV WATCHDOG: CPU: 5: transmit queue 0 timed out 5690 ms [ 121.851782] tegra-mgbe 6910000.ethernet eth1: Reset adapter. [ 121.892464] tegra-mgbe 6910000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 121.905920] tegra-mgbe 6910000.ethernet eth1: PHY [stmmac-1:00] driver [Aquantia AQR113] (irq=171) [ 121.907356] tegra-mgbe 6910000.ethernet eth1: Enabling Safety Features [ 121.907578] tegra-mgbe 6910000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported [ 121.908399] tegra-mgbe 6910000.ethernet eth1: registered PTP clock [ 121.908582] tegra-mgbe 6910000.ethernet eth1: configuring for phy/10gbase-r link mode [ 125.961292] tegra-mgbe 6910000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx [ 181.921198] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 181.921404] rcu: 7-....: (1 GPs behind) idle=540c/1/0x4000000000000002 softirq=1748/1749 fqs=2337 [ 181.921684] rcu: (detected by 4, t=6002 jiffies, g=1357, q=1254 ncpus=8) [ 181.921878] Sending NMI from CPU 4 to CPUs 7: [ 181.921886] NMI backtrace for cpu 7 [ 181.922131] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Kdump: loaded Not tainted 6.13.0-rc3+ #6 [ 181.922390] Hardware name: NVIDIA CTI Forge + Orin AGX/Jetson, BIOS 202402.1-Unknown 10/28/2024 [ 181.922658] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 181.922847] pc : handle_softirqs+0x98/0x368 [ 181.922978] lr : __do_softirq+0x18/0x20 [ 181.923095] sp : ffff80008003bf50 [ 181.923189] x29: ffff80008003bf50 x28: 0000000000000008 x27: 0000000000000000 [ 181.923379] x26: ffffce78ea277000 x25: 0000000000000000 x24: 0000001c61befda0 [ 181.924486] x23: 0000000060400009 x22: ffffce78e99918bc x21: ffff80008018bd70 [ 181.925568] x20: ffffce78e8bb00d8 x19: ffff80008018bc20 x18: 0000000000000000 [ 181.926655] x17: ffff318ebe7d3000 x16: ffff800080038000 x15: 0000000000000000 [ 181.931455] x14: ffff000080816680 x13: ffff318ebe7d3000 x12: 000000003464d91d [ 181.938628] x11: 0000000000000040 x10: ffff000080165a70 x9 : ffffce78e8bb0160 [ 181.945804] x8 : ffff8000827b3160 x7 : f9157b241586f343 x6 : eeb6502a01c81c74 [ 181.953068] x5 : a4acfcdd2e8096bb x4 : ffffce78ea277340 x3 : 00000000ffffd1e1 [ 181.960329] x2 : 0000000000000101 x1 : ffffce78ea277340 x0 : ffff318ebe7d3000 [ 181.967591] Call trace: [ 181.970043] handle_softirqs+0x98/0x368 (P) [ 181.974240] __do_softirq+0x18/0x20 [ 181.977743] ____do_softirq+0x14/0x28 [ 181.981415] call_on_irq_stack+0x24/0x30 [ 181.985180] do_softirq_own_stack+0x20/0x30 [ 181.989379] __irq_exit_rcu+0x114/0x140 [ 181.993142] irq_exit_rcu+0x14/0x28 [ 181.996816] el1_interrupt+0x44/0xb8 [ 182.000316] el1h_64_irq_handler+0x14/0x20 [ 182.004343] el1h_64_irq+0x80/0x88 [ 182.007755] cpuidle_enter_state+0xc4/0x4a8 (P) [ 182.012305] cpuidle_enter+0x3c/0x58 [ 182.015980] cpuidle_idle_call+0x128/0x1c0 [ 182.020005] do_idle+0xe0/0xf0 [ 182.023155] cpu_startup_entry+0x3c/0x48 [ 182.026917] secondary_start_kernel+0xdc/0x120 [ 182.031379] __secondary_switched+0x74/0x78 [ 212.971162] rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 7-.... } 6103 jiffies s: 417 root: 0x80/. [ 212.985935] rcu: blocking rcu_node structures (internal RCU debug): [ 212.992758] Sending NMI from CPU 0 to CPUs 7: [ 212.998539] NMI backtrace for cpu 7 [ 213.004304] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Kdump: loaded Not tainted 6.13.0-rc3+ #6 [ 213.016116] Hardware name: NVIDIA CTI Forge + Orin AGX/Jetson, BIOS 202402.1-Unknown 10/28/2024 [ 213.030817] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 213.040528] pc : handle_softirqs+0x98/0x368 [ 213.046563] lr : __do_softirq+0x18/0x20 [ 213.051293] sp : ffff80008003bf50 [ 213.055839] x29: ffff80008003bf50 x28: 0000000000000008 x27: 0000000000000000 [ 213.067304] x26: ffffce78ea277000 x25: 0000000000000000 x24: 0000001c61befda0 [ 213.077014] x23: 0000000060400009 x22: ffffce78e99918bc x21: ffff80008018bd70 [ 213.087339] x20: ffffce78e8bb00d8 x19: ffff80008018bc20 x18: 0000000000000000 [ 213.097313] x17: ffff318ebe7d3000 x16: ffff800080038000 x15: 0000000000000000 [ 213.107201] x14: ffff000080816680 x13: ffff318ebe7d3000 x12: 000000003464d91d [ 213.116651] x11: 0000000000000040 x10: ffff000080165a70 x9 : ffffce78e8bb0160 [ 213.127500] x8 : ffff8000827b3160 x7 : 0a37b344852820af x6 : 3f049caedd1ff608 [ 213.138002] x5 : cff7cfdbfaf31291 x4 : ffffce78ea277340 x3 : 00000000ffffde04 [ 213.150428] x2 : 0000000000000101 x1 : ffffce78ea277340 x0 : ffff318ebe7d3000 [ 213.162063] Call trace: [ 213.165494] handle_softirqs+0x98/0x368 (P) [ 213.171256] __do_softirq+0x18/0x20 [ 213.177291] ____do_softirq+0x14/0x28 [ 213.182017] call_on_irq_stack+0x24/0x30 [ 213.186565] do_softirq_own_stack+0x20/0x30 [ 213.191815] __irq_exit_rcu+0x114/0x140 [ 213.196891] irq_exit_rcu+0x14/0x28 [ 213.202401] el1_interrupt+0x44/0xb8 [ 213.207741] el1h_64_irq_handler+0x14/0x20 [ 213.213519] el1h_64_irq+0x80/0x88 [ 213.217541] cpuidle_enter_state+0xc4/0x4a8 (P) [ 213.224364] cpuidle_enter+0x3c/0x58 [ 213.228653] cpuidle_idle_call+0x128/0x1c0 [ 213.233993] do_idle+0xe0/0xf0 [ 213.237928] cpu_startup_entry+0x3c/0x48 [ 213.243791] secondary_start_kernel+0xdc/0x120 [ 213.249830] __secondary_switched+0x74/0x78 This bug has existed since the dwmac-tegra driver was added in Dec 2022 (See Fixes tag below for commit hash). The Tegra234 SOC has 4 MGBE controllers, however Nvidia's Developer Kit only uses MGBE0 which is why the bug was not found previously. Connect Tech has many products that use 2 (or more) MGBE controllers. The solution is to read the controller's SID from the existing "iommus" device tree property. The 2nd field of the "iommus" device tree property is the controller's SID. Device tree snippet from tegra234.dtsi showing MGBE1's "iommus" property: smmu_niso0: iommu@12000000 { compatible = "nvidia,tegra234-smmu", "nvidia,smmu-500"; ... } /* MGBE1 */ ethernet@6900000 { compatible = "nvidia,tegra234-mgbe"; ... iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF1>; ... } Nvidia's arm-smmu driver reads the "iommus" property and stores the SID in the MGBE device's "fwspec" struct. The dwmac-tegra driver can access the SID using the tegra_dev_iommu_get_stream_id() helper function found in linux/iommu.h. Calling tegra_dev_iommu_get_stream_id() should not fail unless the "iommus" property is removed from the device tree or the IOMMU is disabled. While the Tegra234 SOC technically supports bypassing the IOMMU, it is not supported by the current firmware, has not been tested and not recommended. More detailed discussion with Thierry Reding from Nvidia linked below. Fixes: d8ca113 ("net: stmmac: tegra: Add MGBE support") Link: https://lore.kernel.org/netdev/cover.1731685185.git.pnewman@connecttech.com Signed-off-by: Parker Newman <pnewman@connecttech.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://patch.msgid.link/6fb97f32cf4accb4f7cf92846f6b60064ba0a3bd.1736284360.git.pnewman@connecttech.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

…/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.16, take #6 - Fix use of u64_replace_bits() in adjusting the guest's view of MDCR_EL2.HPMN.

In the current implementation, the enetc_xdp_xmit() always transmits redirected XDP frames even if the link is down, but the frames cannot be transmitted from TX BD rings when the link is down, so the frames are still kept in the TX BD rings. If the XDP program is uninstalled, users will see the following warning logs. fsl_enetc 0000:00:00.0 eno0: timeout for tx ring #6 clear More worse, the TX BD ring cannot work properly anymore, because the HW PIR and CIR are not equal after the re-initialization of the TX BD ring. At this point, the BDs between CIR and PIR are invalid, which will cause a hardware malfunction. Another reason is that there is internal context in the ring prefetch logic that will retain the state from the first incarnation of the ring and continue prefetching from the stale location when we re-initialize the ring. The internal context is only reset by an FLR. That is to say, for LS1028A ENETC, software cannot set the HW CIR and PIR when initializing the TX BD ring. It does not make sense to transmit redirected XDP frames when the link is down. Add a link status check to prevent transmission in this condition. This fixes part of the issue, but more complex cases remain. For example, the TX BD ring may still contain unsent frames when the link goes down. Those situations require additional patches, which will build on this one. Fixes: 9d2b68c ("net: enetc: add support for XDP_REDIRECT") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20251211020919.121113-1-wei.fang@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

…itives The "valid" readout delay between the two reads of the watchdog is larger than the valid delta between the resulting watchdog and clocksource intervals, which results in false positive watchdog results. Assume TSC is the clocksource and HPET is the watchdog and both have a uncertainty margin of 250us (default). The watchdog readout does: 1) wdnow = read(HPET); 2) csnow = read(TSC); 3) wdend = read(HPET); The valid window for the delta between #1 and #3 is calculated by the uncertainty margins of the watchdog and the clocksource: m = 2 * watchdog.uncertainty_margin + cs.uncertainty margin; which results in 750us for the TSC/HPET case. The actual interval comparison uses a smaller margin: m = watchdog.uncertainty_margin + cs.uncertainty margin; which results in 500us for the TSC/HPET case. That means the following scenario will trigger the watchdog: Watchdog cycle N: 1) wdnow[N] = read(HPET); 2) csnow[N] = read(TSC); 3) wdend[N] = read(HPET); Assume the delay between #1 and #2 is 100us and the delay between #1 and Watchdog cycle N + 1: 4) wdnow[N + 1] = read(HPET); 5) csnow[N + 1] = read(TSC); 6) wdend[N + 1] = read(HPET); If the delay between #4 and #6 is within the 750us margin then any delay between #4 and #5 which is larger than 600us will fail the interval check and mark the TSC unstable because the intervals are calculated against the previous value: wd_int = wdnow[N + 1] - wdnow[N]; cs_int = csnow[N + 1] - csnow[N]; Putting the above delays in place this results in: cs_int = (wdnow[N + 1] + 610us) - (wdnow[N] + 100us); -> cs_int = wd_int + 510us; which is obviously larger than the allowed 500us margin and results in marking TSC unstable. Fix this by using the same margin as the interval comparison. If the delay between two watchdog reads is larger than that, then the readout was either disturbed by interconnect congestion, NMIs or SMIs. Fixes: 4ac1dd3 ("clocksource: Set cs_watchdog_read() checks based on .uncertainty_margin") Reported-by: Daniel J Blueman <daniel@quora.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Tested-by: Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/lkml/20250602223251.496591-1-daniel@quora.org/ Link: https://patch.msgid.link/87bjjxc9dq.ffs@tglx

Quiesce and resume is a mechanism to suspend operations on DASD devices. In the context of a controlled copy pair swap operation, the quiesce operation is usually issued before the actual swap and a resume afterwards. During the swap operation, the underlying device is exchanged. Therefore, the quiesce flag must be moved to the secondary device to ensure a consistent quiesce state after the swap. The secondary device itself cannot be suspended separately because there is no separate block device representation for it. Fixes: 413862c ("s390/dasd: add copy pair swap capability") Cc: stable@vger.kernel.org #6.1 Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Link: https://patch.msgid.link/20260310142330.4080106-2-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>

During online processing for a DASD device an IO operation is started to determine the format of the device. CDL format contains specifically sized blocks at the beginning of the disk. For a PPRC secondary device no real IO operation is possible therefore this IO request can not be started and this step is skipped for online processing of secondary devices. This is generally fine since the secondary is a copy of the primary device. In case of an additional partition detection that is run after a swap operation the format information is needed to properly drive partition detection IO. Currently the information is not passed leading to IO errors during partition detection and a wrongly detected partition table which in turn might lead to data corruption on the disk with the wrong partition table. Fix by passing the format information from primary to secondary device. Fixes: 413862c ("s390/dasd: add copy pair swap capability") Cc: stable@vger.kernel.org #6.1 Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Acked-by: Eduard Shishkin <edward6@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Link: https://patch.msgid.link/20260310142330.4080106-3-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>

SMB2_write() places write payload in iov[1..n] as part of rq_iov. smb3_init_transform_rq() pointer-shares rq_iov, so crypt_message() encrypts iov[1] in-place, replacing the original plaintext with ciphertext. On a replayable error, the retry sends the same iov[1] which now contains ciphertext instead of the original data, resulting in corruption. The corruption is most likely to be observed when connections are unstable, as reconnects trigger write retries that re-send the already-encrypted data. This affects SFU mknod, MF symlinks, etc. On kernels before 6.10 (prior to the netfs conversion), sync writes also used this path and were similarly affected. The async write path wasn't unaffected as it uses rq_iter which gets deep-copied. Fix by moving the write payload into rq_iter via iov_iter_kvec(), so smb3_init_transform_rq() deep-copies it before encryption. Cc: stable@vger.kernel.org #6.3+ Acked-by: Henrique Carvalho <henrique.carvalho@suse.com> Acked-by: Shyam Prasad N <sprasad@microsoft.com> Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Signed-off-by: Bharath SM <bharathsm@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>

The devm_free_irq() and devm_request_irq() functions should not be executed in an atomic context. During device suspend, all userspace processes and most kernel threads are frozen. Additionally, we flush all tx/rx status, disable all macb interrupts, and halt rx operations. Therefore, it is safe to split the region protected by bp->lock into two independent sections, allowing devm_free_irq() and devm_request_irq() to run in a non-atomic context. This modification resolves the following lockdep warning: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 501, name: rtcwake preempt_count: 1, expected: 0 RCU nest depth: 1, expected: 0 7 locks held by rtcwake/501: #0: ffff0008038c3408 (sb_writers#5){.+.+}-{0:0}, at: vfs_write+0xf8/0x368 #1: ffff0008049a5e88 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0xbc/0x1c8 #2: ffff00080098d588 (kn->active#70){.+.+}-{0:0}, at: kernfs_fop_write_iter+0xcc/0x1c8 #3: ffff800081c84888 (system_transition_mutex){+.+.}-{4:4}, at: pm_suspend+0x1ec/0x290 #4: ffff0008009ba0f8 (&dev->mutex){....}-{4:4}, at: device_suspend+0x118/0x4f0 #5: ffff800081d00458 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire+0x4/0x48 #6: ffff0008031fb9e0 (&bp->lock){-.-.}-{3:3}, at: macb_suspend+0x144/0x558 irq event stamp: 8682 hardirqs last enabled at (8681): [<ffff8000813c7d7c>] _raw_spin_unlock_irqrestore+0x44/0x88 hardirqs last disabled at (8682): [<ffff8000813c7b58>] _raw_spin_lock_irqsave+0x38/0x98 softirqs last enabled at (7322): [<ffff8000800f1b4c>] handle_softirqs+0x52c/0x588 softirqs last disabled at (7317): [<ffff800080010310>] __do_softirq+0x20/0x2c CPU: 1 UID: 0 PID: 501 Comm: rtcwake Not tainted 7.0.0-rc3-next-20260310-yocto-standard+ #125 PREEMPT Hardware name: ZynqMP ZCU102 Rev1.1 (DT) Call trace: show_stack+0x24/0x38 (C) __dump_stack+0x28/0x38 dump_stack_lvl+0x64/0x88 dump_stack+0x18/0x24 __might_resched+0x200/0x218 __might_sleep+0x38/0x98 __mutex_lock_common+0x7c/0x1378 mutex_lock_nested+0x38/0x50 free_irq+0x68/0x2b0 devm_irq_release+0x24/0x38 devres_release+0x40/0x80 devm_free_irq+0x48/0x88 macb_suspend+0x298/0x558 device_suspend+0x218/0x4f0 dpm_suspend+0x244/0x3a0 dpm_suspend_start+0x50/0x78 suspend_devices_and_enter+0xec/0x560 pm_suspend+0x194/0x290 state_store+0x110/0x158 kobj_attr_store+0x1c/0x30 sysfs_kf_write+0xa8/0xd0 kernfs_fop_write_iter+0x11c/0x1c8 vfs_write+0x248/0x368 ksys_write+0x7c/0xf8 __arm64_sys_write+0x28/0x40 invoke_syscall+0x4c/0xe8 el0_svc_common+0x98/0xf0 do_el0_svc+0x28/0x40 el0_svc+0x54/0x1e0 el0t_64_sync_handler+0x84/0x130 el0t_64_sync+0x198/0x1a0 Fixes: 558e35c ("net: macb: WoL support for GEM type of Ethernet controller") Cc: stable@vger.kernel.org Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com> Signed-off-by: Kevin Hao <haokexin@gmail.com> Link: https://patch.msgid.link/20260318-macb-irq-v2-1-f1179768ab24@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

…nd napi_tx is false A UAF issue occurs when the virtio_net driver is configured with napi_tx=N and the device's IFF_XMIT_DST_RELEASE flag is cleared (e.g., during the configuration of tc route filter rules). When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack expects the driver to hold the reference to skb->dst until the packet is fully transmitted and freed. In virtio_net with napi_tx=N, skbs may remain in the virtio transmit ring for an extended period. If the network namespace is destroyed while these skbs are still pending, the corresponding dst_ops structure has freed. When a subsequent packet is transmitted, free_old_xmit() is triggered to clean up old skbs. It then calls dst_release() on the skb associated with the stale dst_entry. Since the dst_ops (referenced by the dst_entry) has already been freed, a UAF kernel paging request occurs. fix it by adds skb_dst_drop(skb) in start_xmit to explicitly release the dst reference before the skb is queued in virtio_net. Call Trace: Unable to handle kernel paging request at virtual address ffff80007e150000 CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT ... percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P) dst_release+0xe0/0x110 net/core/dst.c:177 skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177 sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255 dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469 napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527 __free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net] free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net] start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net] ... Reproduction Steps: NETDEV="enp3s0" config_qdisc_route_filter() { tc qdisc del dev $NETDEV root tc qdisc add dev $NETDEV root handle 1: prio tc filter add dev $NETDEV parent 1:0 \ protocol ip prio 100 route to 100 flowid 1:1 ip route add 192.168.1.100/32 dev $NETDEV realm 100 } test_ns() { ip netns add testns ip link set $NETDEV netns testns ip netns exec testns ifconfig $NETDEV 10.0.32.46/24 ip netns exec testns ping -c 1 10.0.32.1 ip netns del testns } config_qdisc_route_filter test_ns sleep 2 test_ns Fixes: f2fc6a5 ("[NETNS][IPV6] route6 - move ip6_dst_ops inside the network namespace") Cc: stable@vger.kernel.org Signed-off-by: xietangxin <xietangxin@yeah.net> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Fixes: 0287587 ("net: better IFF_XMIT_DST_RELEASE support") Link: https://patch.msgid.link/20260312025406.15641-1-xietangxin@yeah.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The generic/728 test-case complains that: (1) Expected ctime needs to be changed after setxattr; (2) Expected ctime needs to be changed after removexattr. This patch adds calling inode_set_ctime_current() in __hfsplus_setxattr() and hfsplus_removexattr(). sudo ./check generic/728 FSTYP -- hfsplus PLATFORM -- Linux/x86_64 hfsplus-testing-0001 7.0.0-rc1+ #6 SMP PREEMPT_DYNAMIC Mon Mar 9 14:29:30 PDT 2026 MKFS_OPTIONS -- /dev/loop51 MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch generic/728 35s ... 44s Ran: generic/728 Passed all 1 tests cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> cc: Yangtao Li <frank.li@vivo.com> cc: linux-fsdevel@vger.kernel.org Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com> Link: https://lore.kernel.org/r/20260309214947.1114618-2-slava@dubeyko.com Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>

Tariq Toukan says: ==================== devlink: add per-port resource support This series by Or adds devlink per-port resource support: Currently, devlink resources are only available at the device level. However, some resources are inherently per-port, such as the maximum number of subfunctions (SFs) that can be created on a specific PF port. This limitation prevents user space from obtaining accurate per-port capacity information. This series adds infrastructure for per-port resources in devlink core and implements it in the mlx5 driver to expose the max_SFs resource on PF devlink ports. Patch #1 refactors resource functions to be generic Patch #2 adds port-level resource registration infrastructure Patch #3 registers SF resource on PF port representor in mlx5 Patch #4 adds devlink port resource registration to netdevsim for testing Patch #5 adds dump support for device-level resources Patch #6 includes port resources in the resource dump dumpit path Patch #7 adds port-specific option to resource dump doit path Patch #8 adds selftest for devlink port resource doit Patch #9 documents port-level resources and full dump Patch #10 adds resource scope filtering to resource dump Patch #11 adds selftest for resource dump and scope filter Patch #12 documents resource scope filtering ==================== Link: https://patch.msgid.link/20260407194107.148063-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, the initialization of loongarch_jump_ops does not contain an assignment to its .free field. This causes disasm_line__free() to fall through to ins_ops__delete() for LoongArch jump instructions. ins_ops__delete() will free ins_operands.source.raw and ins_operands.source.name, and these fields overlaps with ins_operands.jump.raw_comment and ins_operands.jump.raw_func_start. Since in loongarch_jump__parse(), these two fields are populated by strchr()-ing the same buffer, trying to free them will lead to undefined behavior. This invalid free usually leads to crashes: Process 1712902 (perf) of user 1000 dumped core. Stack trace of thread 1712902: #0 0x00007fffef155c58 n/a (libc.so.6 + 0x95c58) #1 0x00007fffef0f7a94 raise (libc.so.6 + 0x37a94) #2 0x00007fffef0dd6a8 abort (libc.so.6 + 0x1d6a8) #3 0x00007fffef145490 n/a (libc.so.6 + 0x85490) #4 0x00007fffef1646f4 n/a (libc.so.6 + 0xa46f4) #5 0x00007fffef164718 n/a (libc.so.6 + 0xa4718) #6 0x00005555583a6764 __zfree (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x106764) #7 0x000055555854fb70 disasm_line__free (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x2afb70) #8 0x000055555853d618 annotated_source__purge (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x29d618) #9 0x000055555852300c __hist_entry__tui_annotate (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x28300c) #10 0x0000555558526718 do_annotate (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x286718) #11 0x000055555852ed94 evsel__hists_browse (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x28ed94) #12 0x000055555831fdd0 cmd_report (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x7fdd0) #13 0x000055555839b644 handle_internal_command (/home/csmantle/dist/linux-arch/tools/perf/perf + 0xfb644) #14 0x00005555582fe6ac main (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x5e6ac) #15 0x00007fffef0ddd90 n/a (libc.so.6 + 0x1dd90) #16 0x00007fffef0ddf0c __libc_start_main (libc.so.6 + 0x1df0c) #17 0x00005555582fed10 _start (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x5ed10) ELF object binary architecture: LoongArch ... and it can be confirmed with Valgrind: ==1721834== Invalid free() / delete / delete[] / realloc() ==1721834== at 0x4EA9014: free (in /usr/lib/valgrind/vgpreload_memcheck-loongarch64-linux.so) ==1721834== by 0x4106287: __zfree (zalloc.c:13) ==1721834== by 0x42ADC8F: disasm_line__free (in /home/csmantle/dist/linux-arch/tools/perf/perf) ==1721834== by 0x429B737: annotated_source__purge (in /home/csmantle/dist/linux-arch/tools/perf/perf) ==1721834== by 0x42811EB: __hist_entry__tui_annotate (in /home/csmantle/dist/linux-arch/tools/perf/perf) ==1721834== by 0x42848D7: do_annotate (in /home/csmantle/dist/linux-arch/tools/perf/perf) ==1721834== by 0x428CF33: evsel__hists_browse (in /home/csmantle/dist/linux-arch/tools/perf/perf) ==1721834== Address 0x7d34303 is 35 bytes inside a block of size 62 alloc'd ==1721834== at 0x4EA59B8: malloc (in /usr/lib/valgrind/vgpreload_memcheck-loongarch64-linux.so) ==1721834== by 0x6B80B6F: strdup (strdup.c:42) ==1721834== by 0x42AD917: disasm_line__new (in /home/csmantle/dist/linux-arch/tools/perf/perf) ==1721834== by 0x42AE5A3: symbol__disassemble_objdump (in /home/csmantle/dist/linux-arch/tools/perf/perf) ==1721834== by 0x42AF0A7: symbol__disassemble (in /home/csmantle/dist/linux-arch/tools/perf/perf) ==1721834== by 0x429B3CF: symbol__annotate (in /home/csmantle/dist/linux-arch/tools/perf/perf) ==1721834== by 0x429C233: symbol__annotate2 (in /home/csmantle/dist/linux-arch/tools/perf/perf) ==1721834== by 0x42804D3: __hist_entry__tui_annotate (in /home/csmantle/dist/linux-arch/tools/perf/perf) ==1721834== by 0x42848D7: do_annotate (in /home/csmantle/dist/linux-arch/tools/perf/perf) ==1721834== by 0x428CF33: evsel__hists_browse (in /home/csmantle/dist/linux-arch/tools/perf/perf) This patch adds the missing free() specialization in loongarch_jump_ops, which prevents disasm_line__free() from invoking the default cleanup function. Fixes: fb7fd2a ("perf annotate: Move raw_comment and raw_func_start fields out of 'struct ins_operands'") Cc: stable@vger.kernel.org Cc: WANG Rui <wangrui@loongson.cn> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: loongarch@lists.linux.dev Signed-off-by: Rong Bao <rong.bao@csmantle.top> Tested-by: WANG Rui <wangrui@loongson.cn> Signed-off-by: Namhyung Kim <namhyung@kernel.org>

do_rbd_add() publishes the device with device_add() before calling device_add_disk(). If device_add_disk() fails after device_add() succeeds, the error path calls rbd_free_disk() directly and then later falls through to rbd_dev_device_release(), which calls rbd_free_disk() again. This double teardown can leave blk-mq cleanup operating on invalid state and trigger a null-ptr-deref in __blk_mq_free_map_and_rqs(), reached from blk_mq_free_tag_set(). Fix this by following the normal remove ordering: call device_del() before rbd_dev_device_release() when device_add_disk() fails after device_add(). That keeps the teardown sequence consistent and avoids re-entering disk cleanup through the wrong path. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. We reproduced the bug on v7.0 with a real Ceph backend and a QEMU x86_64 guest booted with KASAN and CONFIG_FAILSLAB enabled. The reproducer confines failslab injections to the __add_disk() range and injects fail-nth while mapping an RBD image through /sys/bus/rbd/add_single_major. On the unpatched kernel, fail-nth=4 reliably triggered the fault: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 UID: 0 PID: 273 Comm: bash Not tainted 7.0.0-01247-gd60bc1401583 #6 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:__blk_mq_free_map_and_rqs+0x8c/0x240 Code: 00 00 48 8b 6b 60 41 89 f4 49 c1 e4 03 4c 01 e5 45 85 ed 0f 85 0a 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 e9 48 c1 e9 03 <80> 3c 01 00 0f 85 31 01 00 00 4c 8b 6d 00 4d 85 ed 0f 84 e2 00 00 RSP: 0018:ff1100000ab0fac8 EFLAGS: 00000246 RAX: dffffc0000000000 RBX: ff1100000c4806a0 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000000 RDI: ff1100000c4806f4 RBP: 0000000000000000 R08: 0000000000000001 R09: ffe21c000189001b R10: ff1100000c4800df R11: ff1100006cf37be0 R12: 0000000000000000 R13: 0000000000000000 R14: ff1100000c480700 R15: ff1100000c480004 FS: 00007f0fbe8fe740(0000) GS:ff110000e5851000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe53473b2e0 CR3: 0000000012eef000 CR4: 00000000007516f0 PKRU: 55555554 Call Trace: <TASK> blk_mq_free_tag_set+0x77/0x460 do_rbd_add+0x1446/0x2b80 ? __pfx_do_rbd_add+0x10/0x10 ? lock_acquire+0x18c/0x300 ? find_held_lock+0x2b/0x80 ? sysfs_file_kobj+0xb6/0x1b0 ? __pfx_sysfs_kf_write+0x10/0x10 kernfs_fop_write_iter+0x2f4/0x4a0 vfs_write+0x98e/0x1000 ? expand_files+0x51f/0x850 ? __pfx_vfs_write+0x10/0x10 ksys_write+0xf2/0x1d0 ? __pfx_ksys_write+0x10/0x10 do_syscall_64+0x115/0x690 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f0fbea15907 Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007ffe22346ea8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000058 RCX: 00007f0fbea15907 RDX: 0000000000000058 RSI: 0000563ace6c0ef0 RDI: 0000000000000001 RBP: 0000563ace6c0ef0 R08: 0000563ace6c0ef0 R09: 6b6435726d694141 R10: 5250337279762f78 R11: 0000000000000246 R12: 0000000000000058 R13: 00007f0fbeb1c780 R14: ff1100000c480700 R15: ff1100000c480004 </TASK> With this fix applied, rerunning the reproducer over fail-nth=1..256 yields no KASAN reports. [ idryomov: rename err_out_device_del -> err_out_device ] Cc: stable@vger.kernel.org Fixes: 27c97ab ("rbd: add add_disk() error handling") Signed-off-by: Zilin Guan <zilin@seu.edu.cn> Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

ice_reset_all_vfs() ignores the return value of ice_vf_rebuild_vsi(). When the VSI rebuild fails (e.g. during NVM firmware update via nvmupdate64e), ice_vsi_rebuild() tears down the VSI on its error path, leaving txq_map and rxq_map as NULL. The subsequent unconditional call to ice_vf_post_vsi_rebuild() leads to a NULL pointer dereference in ice_ena_vf_q_mappings() when it accesses vsi->txq_map[0]. The single-VF reset path in ice_reset_vf() already handles this correctly by checking the return value of ice_vf_reconfig_vsi() and skipping ice_vf_post_vsi_rebuild() on failure. Apply the same pattern to ice_reset_all_vfs(): check the return value of ice_vf_rebuild_vsi() and skip ice_vf_post_vsi_rebuild() and ice_eswitch_attach_vf() on failure. The VF is left safely disabled (ICE_VF_STATE_INIT not set, VFGEN_RSTAT not set to VFACTIVE) and can be recovered via a VFLR triggered by a PCI reset of the VF (sysfs reset or driver rebind). Note that this patch does not prevent the VF VSI rebuild from failing during NVM update — the underlying cause is firmware being in a transitional state while the EMP reset is processed, which can cause Admin Queue commands (ice_add_vsi, ice_cfg_vsi_lan) to fail. This patch only prevents the subsequent NULL pointer dereference that crashes the kernel when the rebuild does fail. crash> bt PID: 50795 TASK: ff34c9ee708dc680 CPU: 1 COMMAND: "kworker/u512:5" #0 [ff72159bcfe5bb50] machine_kexec at ffffffffaa8850ee #1 [ff72159bcfe5bba8] __crash_kexec at ffffffffaaa15fba #2 [ff72159bcfe5bc68] crash_kexec at ffffffffaaa16540 #3 [ff72159bcfe5bc70] oops_end at ffffffffaa837eda #4 [ff72159bcfe5bc90] page_fault_oops at ffffffffaa893997 #5 [ff72159bcfe5bce8] exc_page_fault at ffffffffab528595 #6 [ff72159bcfe5bd10] asm_exc_page_fault at ffffffffab600bb2 [exception RIP: ice_ena_vf_q_mappings+0x79] RIP: ffffffffc0a85b29 RSP: ff72159bcfe5bdc8 RFLAGS: 00010206 RAX: 00000000000f0000 RBX: ff34c9efc9c00000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000010 RDI: ff34c9efc9c00000 RBP: ff34c9efc27d4828 R8: 0000000000000093 R9: 0000000000000040 R10: ff34c9efc27d4828 R11: 0000000000000040 R12: 0000000000100000 R13: 0000000000000010 R14: R15: ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ff72159bcfe5bdf8] ice_sriov_post_vsi_rebuild at ffffffffc0a85e2e [ice] #8 [ff72159bcfe5be08] ice_reset_all_vfs at ffffffffc0a920b4 [ice] #9 [ff72159bcfe5be48] ice_service_task at ffffffffc0a31519 [ice] #10 [ff72159bcfe5be88] process_one_work at ffffffffaa93dca4 #11 [ff72159bcfe5bec8] worker_thread at ffffffffaa93e9de #12 [ff72159bcfe5bf18] kthread at ffffffffaa946663 #13 [ff72159bcfe5bf50] ret_from_fork at ffffffffaa8086b9 The panic occurs attempting to dereference the NULL pointer in RDX at ice_sriov.c:294, which loads vsi->txq_map (offset 0x4b8 in ice_vsi). The faulting VSI is an allocated slab object but not fully initialized after a failed ice_vsi_rebuild(): crash> struct ice_vsi 0xff34c9efc27d4828 netdev = 0x0, rx_rings = 0x0, tx_rings = 0x0, q_vectors = 0x0, txq_map = 0x0, rxq_map = 0x0, alloc_txq = 0x10, num_txq = 0x10, alloc_rxq = 0x10, num_rxq = 0x10, The nvmupdate64e process was performing NVM firmware update: crash> bt 0xff34c9edd1a30000 PID: 49858 TASK: ff34c9edd1a30000 CPU: 1 COMMAND: "nvmupdate64e" #0 [ff72159bcd617618] __schedule at ffffffffab5333f8 #4 [ff72159bcd617750] ice_sq_send_cmd at ffffffffc0a35347 [ice] #5 [ff72159bcd6177a8] ice_sq_send_cmd_retry at ffffffffc0a35b47 [ice] #6 [ff72159bcd617810] ice_aq_send_cmd at ffffffffc0a38018 [ice] #7 [ff72159bcd617848] ice_aq_read_nvm at ffffffffc0a40254 [ice] #8 [ff72159bcd6178b8] ice_read_flat_nvm at ffffffffc0a4034c [ice] #9 [ff72159bcd617918] ice_devlink_nvm_snapshot at ffffffffc0a6ffa5 [ice] dmesg: ice 0000:13:00.0: firmware recommends not updating fw.mgmt, as it may result in a downgrade. continuing anyways ice 0000:13:00.1: ice_init_nvm failed -5 ice 0000:13:00.1: Rebuild failed, unload and reload driver Fixes: 12bb018 ("ice: Refactor VF reset") Signed-off-by: Petr Oros <poros@redhat.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-5-cdcb48303fd8@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

syzbot reports for sleeping function called from invalid context [1]. The recently added code for resizable hash tables uses hlist_bl bit locks in combination with spin_lock for the connection fields (cp->lock). Fix the following problems: * avoid using spin_lock(&cp->lock) under locked bit lock because it sleeps on PREEMPT_RT * as the recent changes call ip_vs_conn_hash() only for newly allocated connection, the spin_lock can be removed there because the connection is still not linked to table and does not need cp->lock protection. * the lock can be removed also from ip_vs_conn_unlink() where we are the last connection user. * the last place that is fixed is ip_vs_conn_fill_cport() where now the cp->lock is locked before the other locks to ensure other packets do not modify the cp->flags in non-atomic way. Here we make sure cport and flags are changed only once if two or more packets race to fill the cport. Also, we fill cport early, so that if we race with resizing there will be valid cport key for the hashing. Add a warning if too many hash table changes occur for our RCU read-side critical section which is error condition but minor because the connection still can expire gracefully. Still, restore the cport to 0 to allow retransmitted packet to properly fill the cport. Problems reported by Sashiko. [1]: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 16, name: ktimers/0 preempt_count: 2, expected: 0 RCU nest depth: 3, expected: 3 8 locks held by ktimers/0/16: #0: ffffffff8de5f260 (local_bh){.+.+}-{1:3}, at: __local_bh_disable_ip+0x3c/0x420 kernel/softirq.c:163 #1: ffffffff8dfc80c0 (rcu_read_lock){....}-{1:3}, at: __local_bh_disable_ip+0x3c/0x420 kernel/softirq.c:163 #2: ffff8880b8826360 (&base->expiry_lock){+...}-{3:3}, at: spin_lock include/linux/spinlock_rt.h:45 [inline] #2: ffff8880b8826360 (&base->expiry_lock){+...}-{3:3}, at: timer_base_lock_expiry kernel/time/timer.c:1502 [inline] #2: ffff8880b8826360 (&base->expiry_lock){+...}-{3:3}, at: __run_timer_base+0x120/0x9f0 kernel/time/timer.c:2384 #3: ffffffff8dfc80c0 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:300 [inline] #3: ffffffff8dfc80c0 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #3: ffffffff8dfc80c0 (rcu_read_lock){....}-{1:3}, at: __rt_spin_lock kernel/locking/spinlock_rt.c:50 [inline] #3: ffffffff8dfc80c0 (rcu_read_lock){....}-{1:3}, at: rt_spin_lock+0x1e0/0x400 kernel/locking/spinlock_rt.c:57 #4: ffffc90000157a80 ((&cp->timer)){+...}-{0:0}, at: call_timer_fn+0xd4/0x5e0 kernel/time/timer.c:1745 #5: ffffffff8dfc80c0 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:300 [inline] #5: ffffffff8dfc80c0 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #5: ffffffff8dfc80c0 (rcu_read_lock){....}-{1:3}, at: ip_vs_conn_unlink net/netfilter/ipvs/ip_vs_conn.c:315 [inline] #5: ffffffff8dfc80c0 (rcu_read_lock){....}-{1:3}, at: ip_vs_conn_expire+0x257/0x2390 net/netfilter/ipvs/ip_vs_conn.c:1260 #6: ffffffff8de5f260 (local_bh){.+.+}-{1:3}, at: __local_bh_disable_ip+0x3c/0x420 kernel/softirq.c:163 #7: ffff888068d4c3f0 (&cp->lock#2){+...}-{3:3}, at: spin_lock include/linux/spinlock_rt.h:45 [inline] #7: ffff888068d4c3f0 (&cp->lock#2){+...}-{3:3}, at: ip_vs_conn_unlink net/netfilter/ipvs/ip_vs_conn.c:324 [inline] #7: ffff888068d4c3f0 (&cp->lock#2){+...}-{3:3}, at: ip_vs_conn_expire+0xd4a/0x2390 net/netfilter/ipvs/ip_vs_conn.c:1260 Preemption disabled at: [<ffffffff898a6358>] bit_spin_lock include/linux/bit_spinlock.h:38 [inline] [<ffffffff898a6358>] hlist_bl_lock+0x18/0x110 include/linux/list_bl.h:149 CPU: 0 UID: 0 PID: 16 Comm: ktimers/0 Tainted: G W L syzkaller #0 PREEMPT_{RT,(full)} Tainted: [W]=WARN, [L]=SOFTLOCKUP Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/18/2026 Call Trace: <TASK> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 __might_resched+0x329/0x480 kernel/sched/core.c:9162 __rt_spin_lock kernel/locking/spinlock_rt.c:48 [inline] rt_spin_lock+0xc2/0x400 kernel/locking/spinlock_rt.c:57 spin_lock include/linux/spinlock_rt.h:45 [inline] ip_vs_conn_unlink net/netfilter/ipvs/ip_vs_conn.c:324 [inline] ip_vs_conn_expire+0xd4a/0x2390 net/netfilter/ipvs/ip_vs_conn.c:1260 call_timer_fn+0x192/0x5e0 kernel/time/timer.c:1748 expire_timers kernel/time/timer.c:1799 [inline] __run_timers kernel/time/timer.c:2374 [inline] __run_timer_base+0x6a3/0x9f0 kernel/time/timer.c:2386 run_timer_base kernel/time/timer.c:2395 [inline] run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2405 handle_softirqs+0x1de/0x6d0 kernel/softirq.c:622 __do_softirq kernel/softirq.c:656 [inline] run_ktimerd+0x69/0x100 kernel/softirq.c:1151 smpboot_thread_fn+0x541/0xa50 kernel/smpboot.c:160 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Reported-by: syzbot+504e778ddaecd36fdd17@syzkaller.appspotmail.com Link: https://sashiko.dev/#/patchset/20260415200216.79699-1-ja%40ssi.bg Link: https://sashiko.dev/#/patchset/20260420165539.85174-4-ja%40ssi.bg Link: https://sashiko.dev/#/patchset/20260422135823.50489-4-ja%40ssi.bg Fixes: 2fa7cc9 ("ipvs: switch to per-net connection table") Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Fix netfs_read_gaps() to release the sink page it uses after waiting for the request to complete. The way the sink page is used is that an ITER_BVEC-class iterator is created that has the gaps from the target folio at either end, but has the sink page tiled over the middle so that a single read op can fill in both gaps. The bug was found by KASAN detecting a UAF on the generic/075 xfstest in the cifsd kernel thread that handles reception of data from the TCP socket: BUG: KASAN: use-after-free in _copy_to_iter+0x48a/0xa20 Write of size 885 at addr ffff888107f92000 by task cifsd/1285 CPU: 2 UID: 0 PID: 1285 Comm: cifsd Not tainted 7.0.0 #6 PREEMPT(lazy) Call Trace: dump_stack_lvl+0x5d/0x80 print_report+0x17f/0x4f1 kasan_report+0x100/0x1e0 kasan_check_range+0x10f/0x1e0 __asan_memcpy+0x3c/0x60 _copy_to_iter+0x48a/0xa20 __skb_datagram_iter+0x2c9/0x430 skb_copy_datagram_iter+0x6e/0x160 tcp_recvmsg_locked+0xce0/0x1130 tcp_recvmsg+0xeb/0x300 inet_recvmsg+0xcf/0x3a0 sock_recvmsg+0xea/0x100 cifs_readv_from_socket+0x3a6/0x4d0 [cifs] cifs_read_iter_from_socket+0xdd/0x130 [cifs] cifs_readv_receive+0xaad/0xb10 [cifs] cifs_demultiplex_thread+0x1148/0x1740 [cifs] kthread+0x1cf/0x210 Fixes: ee4cdf7 ("netfs: Speed up buffered reading") Reported-by: Steve French <sfrench@samba.org> Signed-off-by: David Howells <dhowells@redhat.com> Link: https://patch.msgid.link/20260512123404.719402-18-dhowells@redhat.com Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> cc: Paulo Alcantara <pc@manguebit.org> cc: Matthew Wilcox <willy@infradead.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>

…_entry() Several functions in scripts/mod/file2alias.c build the module alias string by repeatedly appending into a fixed-size on-stack buffer: char alias[256] = {}; ... sprintf(alias + strlen(alias), "%X,*", i); This pattern is unbounded and silently corrupts the stack when the formatted output exceeds the destination size. Two functions in this file are realistically reachable with input that overflows their buffer: 1. do_input_entry() appends across nine bitmap classes (evbit/keybit/relbit/absbit/mscbit/ledbit/sndbit/ffbit/swbit). The keybit case alone scans bits from INPUT_DEVICE_ID_KEY_MIN_INTERESTING (0x71) to INPUT_DEVICE_ID_KEY_MAX (0x2ff), 655 iterations; if a MODULE_DEVICE_TABLE(input, ...) populates keybit[] densely, the emission reaches ~3132 bytes — overflowing the 256-byte buffer by about 12x. include/linux/mod_devicetable.h declares storage for the full bit range ("keybit[INPUT_DEVICE_ID_KEY_MAX / BITS_PER_LONG + 1]"), so the worst case is reachable per the ABI. 2. do_dmi_entry() emits one ":<prefix>*<filtered_substr>*" segment per matched DMI field, up to 4 matches per dmi_system_id. Each substr is sized as char[79] in struct dmi_strmatch (mod_devicetable.h:584), and dmi_ascii_filter() copies it verbatim into the alias buffer without bounds. Worst case: 4 × (1 + 3 + 1 + 79 + 1) = 336 bytes into alias[256], an 80-byte overflow. No driver in the current tree triggers either case — every in-tree INPUT_DEVICE_ID_MATCH_KEYBIT user populates keybit[] very sparsely (1-3 bits), and no in-tree dmi_system_id has four maximally-long matches. The concern is defense-in-depth: both unbounded sprintf chains are silent stack-corruption primitives in a host build tool, and the buffer sizes have not been revisited since the corresponding code was first introduced. The other do_*_entry() handlers in this file (do_usb_entry, do_cpu_entry, do_typec_entry, ...) were audited and are bounded by their input field sizes (uint16 IDs, fixed-length keys); their alias buffers do not need this treatment. Reproduced under AddressSanitizer with a stand-alone harness mirroring do_input on a fully-populated keybit: ==18319==ERROR: AddressSanitizer: stack-buffer-overflow WRITE of size 2 at offset 288 in frame [32, 288) 'alias' #6 do_input poc.c:44 Stack-canary build: Abort trap: 6 (strlen(alias)=3134, cap was 256-1) Add a small alias_append() helper around vsnprintf with a remaining- space check and call fatal() on overflow, matching the modpost style for unrecoverable build conditions. do_input() takes the buffer size as a new parameter; do_input_entry() and do_dmi_entry() pass sizeof(alias) at every call site. dmi_ascii_filter() takes the remaining buffer size as well and aborts on truncation. This bounds every write into the on-stack buffers and turns the latent overflow into a clean build error if it is ever reached. Fixes: 1d8f430 ("[PATCH] Input: add modalias support") Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Hasan Basbunar <basbunarhasan@gmail.com> Link: https://patch.msgid.link/20260505161102.44087-1-basbunarhasan@gmail.com Signed-off-by: Nicolas Schier <nsc@kernel.org>

Unlocking robust non-PI futexes happens in user space with the following sequence: 1) robust_list_set_op_pending(mutex); 2) robust_list_remove(mutex); lval = 0; 3) lval = atomic_xchg(lock, lval); 4) if (lval & WAITERS) 5) sys_futex(WAKE,....); 6) robust_list_clear_op_pending(); That opens a window between #3 and #6 where the mutex could be acquired by some other task which observes that it is the last user and: A) unmaps the mutex memory B) maps a different file, which ends up covering the same address When the original task exits before reaching #6 then the kernel robust list handling observes the pending op entry and tries to fix up user space. In case that the newly mapped data contains the TID of the exiting thread at the address of the mutex/futex the kernel will set the owner died bit in that memory and therefore corrupting unrelated data. PI futexes have a similar problem both for the non-contented user space unlock and the in kernel unlock: 1) robust_list_set_op_pending(mutex); 2) robust_list_remove(mutex); lval = gettid(); 3) if (!atomic_try_cmpxchg(lock, lval, 0)) 4) sys_futex(UNLOCK_PI,....); 5) robust_list_clear_op_pending(); Address the first part of the problem where the futexes have waiters and need to enter the kernel anyway. Add a new FUTEX_ROBUST_UNLOCK flag, which is valid for the sys_futex() FUTEX_UNLOCK_PI, FUTEX_WAKE, FUTEX_WAKE_BITSET operations. This deliberately omits FUTEX_WAKE_OP from this treatment as it's unclear whether this is needed and there is no usage of it in glibc either to investigate. For the futex2 syscall family this needs to be implemented with a new syscall. The sys_futex() case [ab]uses the @uaddr2 argument to hand the pointer to robust_list_head::list_pending_op into the kernel. This argument is only evaluated when the FUTEX_ROBUST_UNLOCK bit is set and is therefore backward compatible. This is an explicit argument to avoid the lookup of the robust list pointer and retrieving the pending op pointer from there. User space has the pointer already available so it can just put it into the @uaddr2 argument. Aside of that this allows the usage of multiple robust lists in the future without any changes to the internal functions as they just operate on the provided pointer. This requires a second flag FUTEX_ROBUST_LIST32 which indicates that the robust list pointer points to an u32 and not to an u64. This is required for two reasons: 1) sys_futex() has no compat variant 2) The gaming emulators use both both 64-bit and compat 32-bit robust lists in the same 64-bit application As a consequence 32-bit applications have to set this flag unconditionally so they can run on a 64-bit kernel in compat mode unmodified. 32-bit kernels return an error code when the flag is not set. 64-bit kernels will happily clear the full 64 bits if user space fails to set it. In case of FUTEX_UNLOCK_PI this clears the robust list pending op when the unlock succeeded. In case of errors, the user space value is still locked by the caller and therefore the above cannot happen. In case of FUTEX_WAKE* this does the unlock of the futex in the kernel and clears the robust list pending op when the unlock was successful. If not, the user space value is still locked and user space has to deal with the returned error. That means that the unlocking of non-PI robust futexes has to use the same try_cmpxchg() unlock scheme as PI futexes. If the clearing of the pending list op fails (fault) then the kernel clears the registered robust list pointer if it matches to prevent that exit() will try to handle invalid data. That's a valid paranoid decision because the robust list head sits usually in the TLS and if the TLS is not longer accessible then the chance for fixing up the resulting mess is very close to zero. The problem of non-contended unlocks still exists and will be addressed separately. Signed-off-by: Thomas Gleixner <tglx@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: André Almeida <andrealmeid@igalia.com> Link: https://patch.msgid.link/20260602090535.670514505@kernel.org

…announcements' Danielle Ratson says: ==================== bridge: Add selective forwarding of gratuitous neighbor announcements The existing neighbor suppression unconditionally suppresses gratuitous ARPs and unsolicited Neighbor Advertisements, which prevents fast mobility of hosts between VTEPs. This series adds a new neigh_forward_grat option that provides independent control of gratuitous ARP and unsolicited NA forwarding. When neigh_suppress is enabled but neigh_forward_grat is enabled, regular neighbor discovery is suppressed while gratuitous announcements are forwarded. The implementation marks gratuitous ARPs and unsolicited NAs in BR_INPUT_SKB_CB during input processing, then checks the per-output-port neigh_forward_grat setting during flooding. This allows gratuitous announcements from any input port to be selectively forwarded based on each output port's individual configuration. Both port-level control (via IFLA_BRPORT_NEIGH_FORWARD_GRAT) and per-VLAN control (via BRIDGE_VLANDB_ENTRY_NEIGH_FORWARD_GRAT) are provided. The default value of OFF preserves existing behavior. This behavior is in accordance with RFC 9161 (Section 3.6), which recommends that VTEPs forward gratuitous ARP and unsolicited NA messages to avoid traffic disruption during host mobility events. The new attributes use NLA_U8, although the kernel netlink guideline recommends NLA_U32 as the minimum integer type on the grounds that alignment makes smaller types equivalent on the wire. For a simple on/off attribute there is no technical advantage to u32 over u8, and keeping u8 preserves consistency with all surrounding bridge port attributes and avoids introducing new helpers alongside the existing infrastructure. Patchset overview: Patch #1: adds uapi headers. Patches #2-#3: support selective forwarding of gratuitous ARP. Patches #4-#5: add netlink handling. Patch #6: adds tests. Please see iproute related patches in the last 3 commits of: https://github.com/daniellerts/iproute2 ==================== Link: https://patch.msgid.link/20260511065936.4173106-1-danieller@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

l2cap_chan_timeout() runs asynchronously and accesses chan->conn. If the connection is torn down while the timer is running or pending, chan->conn can be freed, leading to a use-after-free when the timer worker attempts to lock conn->lock: | BUG: KASAN: slab-use-after-free in instrument_atomic_read_write include/linux/instrumented.h:112 [inline] | BUG: KASAN: slab-use-after-free in atomic_long_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:4456 [inline] | BUG: KASAN: slab-use-after-free in __mutex_trylock_fast kernel/locking/mutex.c:161 [inline] | BUG: KASAN: slab-use-after-free in mutex_lock+0x4f/0xa0 kernel/locking/mutex.c:318 | Write of size 8 at addr ffff8881298d9550 by task kworker/2:1/83 | | CPU: 2 UID: 0 PID: 83 Comm: kworker/2:1 Not tainted 7.1.0-rc6-next-20260601-dirty #6 PREEMPT(full) | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 | Workqueue: events l2cap_chan_timeout | Call Trace: | <TASK> | instrument_atomic_read_write include/linux/instrumented.h:112 [inline] | atomic_long_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:4456 [inline] | __mutex_trylock_fast kernel/locking/mutex.c:161 [inline] | mutex_lock+0x4f/0xa0 kernel/locking/mutex.c:318 | l2cap_chan_timeout+0x5d/0x1b0 net/bluetooth/l2cap_core.c:422 | process_one_work kernel/workqueue.c:3326 [inline] | process_scheduled_works+0x7c8/0xfb0 kernel/workqueue.c:3409 | worker_thread+0x8a9/0xcf0 kernel/workqueue.c:3490 | kthread+0x346/0x430 kernel/kthread.c:436 | ret_from_fork+0x1a3/0x470 arch/x86/kernel/process.c:158 | ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 | </TASK> | | Allocated by task 320: | l2cap_conn_add+0xa7/0x820 net/bluetooth/l2cap_core.c:7075 | l2cap_connect_cfm+0xdb/0xd70 net/bluetooth/l2cap_core.c:7452 | hci_connect_cfm include/net/bluetooth/hci_core.h:2139 [inline] | hci_remote_features_evt+0x52f/0x9f0 net/bluetooth/hci_event.c:3760 | hci_event_func net/bluetooth/hci_event.c:7796 [inline] | hci_event_packet+0x561/0xa70 net/bluetooth/hci_event.c:7847 | hci_rx_work+0x370/0x890 net/bluetooth/hci_core.c:4040 | process_one_work kernel/workqueue.c:3326 [inline] | process_scheduled_works+0x7c8/0xfb0 kernel/workqueue.c:3409 | worker_thread+0x8a9/0xcf0 kernel/workqueue.c:3490 | kthread+0x346/0x430 kernel/kthread.c:436 | ret_from_fork+0x1a3/0x470 arch/x86/kernel/process.c:158 | ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 | | Freed by task 322: | hci_disconn_cfm include/net/bluetooth/hci_core.h:2154 [inline] | hci_conn_hash_flush+0x101/0x1f0 net/bluetooth/hci_conn.c:2736 | hci_dev_close_sync+0x889/0xde0 net/bluetooth/hci_sync.c:5405 | hci_dev_do_close net/bluetooth/hci_core.c:502 [inline] | hci_unregister_dev+0x1f7/0x370 net/bluetooth/hci_core.c:2679 | vhci_release+0x12a/0x180 drivers/bluetooth/hci_vhci.c:690 | __fput+0x369/0x890 fs/file_table.c:510 | task_work_run+0x160/0x1d0 kernel/task_work.c:233 | get_signal+0xf5b/0x1120 kernel/signal.c:2810 | arch_do_signal_or_restart+0x4d/0x600 arch/x86/kernel/signal.c:337 | __exit_to_user_mode_loop kernel/entry/common.c:64 [inline] | exit_to_user_mode_loop+0x85/0x510 kernel/entry/common.c:98 | do_syscall_64+0x263/0x3d0 arch/x86/entry/syscall_64.c:100 | entry_SYSCALL_64_after_hwframe+0x77/0x7f | | The buggy address belongs to the object at ffff8881298d9400 | which belongs to the cache kmalloc-512 of size 512 | The buggy address is located 336 bytes inside of | freed 512-byte region [ffff8881298d9400, ffff8881298d9600) Fix it by having chan->conn hold a reference to l2cap_conn (via l2cap_conn_get) when the channel is added to the connection, and releasing it in the channel destructor. This ensures the l2cap_conn remains alive as long as the channel exists. A new FLAG_DEL channel flag is introduced to indicate that the channel has been deleted from its connection. l2cap_chan_del() atomically sets this flag using test_and_set_bit() instead of setting chan->conn to NULL. All asynchronous workers (l2cap_chan_timeout, l2cap_ack_timeout, l2cap_monitor_timeout, l2cap_retrans_timeout) and l2cap_chan_send() check FLAG_DEL to determine whether the channel has been torn down, rather than testing chan->conn for NULL. Fixes: 8c8e620 ("Bluetooth: L2CAP: use chan timer to close channels in cleanup_listen()") Cc: <stable@vger.kernel.org> Cc: Siwei Zhang <oss@fourdim.xyz> Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Assisted-by: Gemini:gemini-3.1-pro-preview Reported-by: https://sashiko.dev/#/patchset/20260521021249.3258069-1-oss%40fourdim.xyz Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Leon Hwang says: ==================== bpf: Extend BPF syscall with common attributes support This patch series builds upon the discussion in "[PATCH bpf-next v4 0/4] bpf: Improve error reporting for freplace attachment failure" [1]. This patch series introduces support for *common attributes* in the BPF syscall, providing a unified mechanism for passing shared metadata across all BPF commands, initially used by BPF_PROG_LOAD, BPF_BTF_LOAD, and BPF_MAP_CREATE. The initial set of common attributes includes: 1. 'log_buf': User-provided buffer for storing log output. 2. 'log_size': Size of the provided log buffer. 3. 'log_level': Verbosity level for logging. 4. 'log_true_size': Actual log size reported by kernel. With this extension, the BPF syscall will be able to return meaningful error messages (e.g., map creation failures), improving debuggability and user experience. Links: [1] https://lore.kernel.org/bpf/20250224153352.64689-1-leon.hwang@linux.dev/ Changes: v13 -> v14: * Replace __u64 with __aligned_u64 in struct bpf_common_attr in patch #1 (per bot+bpf-ci). * Add a single line comment for preserving original error in patch #6 (per bot+bpf-ci and Alexei). * Drop unused label in patch #6 (per bot+bpf-ci). * v13: https://lore.kernel.org/bpf/20260511152817.89191-1-leon.hwang@linux.dev/ v12 -> v13: * Rebase on bpf-next tree to resolve code conflict. * Report log_true_size on success path in patch #6. * Check size instead of common->log_buf in patch #6 (per bot+bpf-ci). * v12: https://lore.kernel.org/bpf/20260420141804.27179-1-leon.hwang@linux.dev/ v11 -> v12: * Drop "log_" prefix in struct bpf_log_attr in patch #3. * Drop "log_" prefix in struct bpf_log_opts in patch #7. * Copy log_true_size using copy_to_bpfptr_offset() in patch #3 (per Alexei). * v11: https://lore.kernel.org/bpf/20260216150445.68278-1-leon.hwang@linux.dev/ v10 -> v11: * Collect Acked-by from Andrii, thanks. * Validate whether log_buf, log_size, and log_level are valid by reusing bpf_verifier_log_attr_valid() in patch #4 (per Andrii). * v10: https://lore.kernel.org/bpf/20260211151115.78013-1-leon.hwang@linux.dev/ v9 -> v10: * Collect Acked-by from Andrii, thanks. * Address comments from Andrii: * Drop log NULL check in bpf_log_attr_finalize(). * Return -EFAULT early in bpf_log_attr_finalize(). * Validate whether log_buf, log_size, and log_level are set. * Keep log_buf, log_size, log_level, and user-pointer log_true_size in struct bpf_log_attr. * Make prog_load and btf_load work with the new struct bpf_log_attr. * Add comment to log_true_size of struct bpf_log_opts in libbpf. * Address comment from Alexei: * Avoid using BPF_LOG_FIXED as log_level in tests. * v9: https://lore.kernel.org/bpf/20260202144046.30651-1-leon.hwang@linux.dev/ v8 -> v9: * Rework reporting 'log_true_size' for prog_load, btf_load, and map_create to simplify struct bpf_log_attr (per Alexei). * v8: https://lore.kernel.org/bpf/20260126151409.52072-1-leon.hwang@linux.dev/ v7 -> v8: * Return 0 when fd < 0 and errno != EFAULT in probe_sys_bpf_ext(), then simplify probe_bpf_syscall_common_attrs() (per Alexei and Andrii). * v7: https://lore.kernel.org/bpf/20260123032445.125259-1-leon.hwang@linux.dev/ v6 -> v7: * Return -errno when fd < 0 and errno != EFAULT in probe_sys_bpf_ext(). * Convert return value of probe_sys_bpf_ext() to bool in probe_bpf_syscall_common_attrs(). * Address comments from Andrii: * Drop the comment, and handle fd >= 0 case explicitly in probe_sys_bpf_ext(). * Return an error when fd >= 0 in probe_sys_bpf_ext(). * v6: https://lore.kernel.org/bpf/20260120152424.40766-1-leon.hwang@linux.dev/ v5 -> v6: * Address comments from Andrii: * Update some variables' name. * Drop unnecessary 'close(fd)' in libbpf. * Rename FEAT_EXTENDED_SYSCALL to FEAT_BPF_SYSCALL_COMMON_ATTRS with updated description in libbpf. * Use EINVAL instead of EUSERS, as EUSERS is not used in bpf yet. * Rename struct bpf_syscall_common_attr_opts to bpf_log_opts in libbpf. * Add 'OPTS_SET(log_opts, log_true_size, 0);' in libbpf's 'bpf_map_create()'. * v5: https://lore.kernel.org/bpf/20260112145616.44195-1-leon.hwang@linux.dev/ v4 -> v5: * Rework reporting 'log_true_size' for prog_load, btf_load, and map_create (per Alexei). * v4: https://lore.kernel.org/bpf/20260106172018.57757-1-leon.hwang@linux.dev/ RFC v3 -> v4: * Drop RFC. * Address comments from Andrii: * Add parentheses in 'sys_bpf_ext()'. * Avoid creating new fd in 'probe_sys_bpf_ext()'. * Add a new struct to wrap log fields in libbpf. * Address comments from Alexei: * Do not skip writing to user space when log_true_size is zero. * Do not use 'bool' arguments. * Drop the adding WARN_ON_ONCE()'s. * v3: https://lore.kernel.org/bpf/20251002154841.99348-1-leon.hwang@linux.dev/ RFC v2 -> RFC v3: * Rename probe_sys_bpf_extended to probe_sys_bpf_ext. * Refactor reporting 'log_true_size' for prog_load. * Refactor reporting 'btf_log_true_size' for btf_load. * Add warnings for internal bugs in map_create. * Check log_true_size in test cases. * Address comment from Alexei: * Change kvzalloc/kvfree to kzalloc/kfree. * Address comments from Andrii: * Move BPF_COMMON_ATTRS to 'enum bpf_cmd' alongside brief comment. * Add bpf_check_uarg_tail_zero() for extra checks. * Rename sys_bpf_extended to sys_bpf_ext. * Rename sys_bpf_fd_extended to sys_bpf_ext_fd. * Probe the new feature using NULL and -EFAULT. * Move probe_sys_bpf_ext to libbpf_internal.h and drop LIBBPF_API. * Return -EUSERS when log attrs are conflict between bpf_attr and bpf_common_attr. * Avoid touching bpf_vlog_init(). * Update the reason messages in map_create. * Finalize the log using __cleanup(). * Report log size to users. * Change type of log_buf from '__u64' to 'const char *' and cast type using ptr_to_u64() in bpf_map_create(). * Do not return -EOPNOTSUPP when kernel doesn't support this feature in bpf_map_create(). * Add log_level support for map creation for consistency. * Address comment from Eduard: * Use common_attrs->log_level instead of BPF_LOG_FIXED. * v2: https://lore.kernel.org/bpf/20250911163328.93490-1-leon.hwang@linux.dev/ RFC v1 -> RFC v2: * Fix build error reported by test bot. * Address comments from Alexei: * Drop new uapi for freplace. * Add common attributes support for prog_load and btf_load. * Add common attributes support for map_create. * v1: https://lore.kernel.org/bpf/20250728142346.95681-1-leon.hwang@linux.dev/ ==================== Link: https://patch.msgid.link/20260512153157.28382-1-leon.hwang@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>

strset_add_str_mem() might reallocate the strset data buffer in order to accommodate the provided string 's'. However, if 's' points to a string already present in the buffer, it becomes dangling after the realloc. This leads to a use-after-free when attempting to memcpy() the string into the new buffer. One scenario that triggers this problematic path is when resolve_btfids attempts to patch kfunc prototypes using existing BTF parameter names: | resolve_btfids: function bpf_list_push_back_impl already exists in BTF | Segmentation fault (core dumped) Compiling resolve_btfids with fsanitize=address generates a detailed report of the UAF: | ================================================================= | ERROR: AddressSanitizer: heap-use-after-free on address 0x7f4c4a500bd4 | ==1507892==ERROR: AddressSanitizer: heap-use-after-free on address 0x7f4c4a500bd4 at pc 0x55d25155a2a8 bp 0x7ffcef879060 sp 0x7ffcef878818 | READ of size 5 at 0x7f4c4a500bd4 thread T0 | #0 0x55d25155a2a7 in memcpy (tools/bpf/resolve_btfids/resolve_btfids+0xcf2a7) | #1 0x55d2515d708e in strset__add_str tools/lib/bpf/strset.c:162:2 | #2 0x55d2515c730b in btf__add_str tools/lib/bpf/btf.c:2109:8 | #3 0x55d2515c9020 in btf__add_func_param tools/lib/bpf/btf.c:3108:14 | #4 0x55d25159f0b5 in process_kfunc_with_implicit_args tools/bpf/resolve_btfids/main.c:1196:9 | #5 0x55d25159e004 in btf2btf tools/bpf/resolve_btfids/main.c:1229:9 | #6 0x55d25159cee7 in main tools/bpf/resolve_btfids/main.c:1535:6 | #7 0x7f4c78e29f76 in __libc_start_call_main csu/../sysdeps/nptl/libc_start_call_main.h:58:16 | #8 0x7f4c78e2a026 in __libc_start_main csu/../csu/libc-start.c:360:3 | #9 0x55d2514bb860 in _start (tools/bpf/resolve_btfids/resolve_btfids+0x30860) | | 0x7f4c4a500bd4 is located 13268 bytes inside of 2829000-byte region [0x7f4c4a4fd800,0x7f4c4a7b02c8) | freed by thread T0 here: | #0 0x55d25155b700 in realloc (tools/bpf/resolve_btfids/resolve_btfids+0xd0700) | #1 0x55d2515c426c in libbpf_reallocarray tools/lib/bpf/./libbpf_internal.h:220:9 | #2 0x55d2515c426c in libbpf_add_mem tools/lib/bpf/btf.c:224:13 | | previously allocated by thread T0 here: | #0 0x55d25155b2e3 in malloc (tools/bpf/resolve_btfids/resolve_btfids+0xd02e3) | #1 0x55d2515d6e7d in strset__new tools/lib/bpf/strset.c:58:20 While resolve_btfids could be refactored to avoid this call path, let's instead fix this issue at the source in strset__add_str() and avoid similar scenarios. Let's check if set->strs_data was reallocated and whether 's' points to an internal string within the old strset buffer. In such case, 's' is reconstructed to point to the new buffer. While already here, also fix strset__find_str() which suffers from the same problem by factoring out the common operations into a new helper function strset_str_append(). Fixes: 90d76d3 ("libbpf: Extract internal set-of-strings datastructure APIs") Suggested-by: Andrii Nakryiko <andrii@kernel.org> Suggested-by: Mykyta Yatsenko <yatsenko@meta.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20260523162722.2718940-1-cmllamas@google.com

When writing to sysctls, proc_sys_call_handler() guarantees that the buffer passed to proc handlers is NUL-terminated. If bpf_sysctl_set_new_value() replaces the pending sysctl value, it can hand a replacement buffer directly to proc handlers. However, the helper currently copies only buf_len bytes into that buffer without appending a NUL terminator, leaving downstream parsers vulnerable to out-of-bounds access. Fix this by appending a '\0' after the replaced value to restore the expected sysctl semantics. Since the helper already rejects buf_len greater than PAGE_SIZE - 1, there is always room for the extra byte. Reproduced in a QEMU x86_64 guest booted with KASAN while exercising the sysctl replacement path with a cgroup/sysctl BPF program. The reproducer targets `/proc/sys/net/core/flow_limit_cpu_bitmap`, fills the original user write buffer with non-zero bytes, and overrides the sysctl value so the replacement buffer lacks a terminating NUL. Under that setup, the pre-fix kernel reported: BUG: KASAN: slab-out-of-bounds in strnchrnul+0x72/0x90 Read of size 1 at addr ffff88800de57000 by task repro_patch3/66 CPU: 0 UID: 0 PID: 66 Comm: repro_patch3 Not tainted 7.1.0-rc3-00269-g8370ca1f87cc #6 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x68/0xa0 print_report+0xcb/0x5e0 ? __virt_addr_valid+0x21d/0x3f0 ? strnchrnul+0x72/0x90 ? strnchrnul+0x72/0x90 kasan_report+0xca/0x100 ? strnchrnul+0x72/0x90 strnchrnul+0x72/0x90 bitmap_parse+0x37/0x2e0 flow_limit_cpu_sysctl+0xc6/0x840 ? __pfx_flow_limit_cpu_sysctl+0x10/0x10 ? __kvmalloc_node_noprof+0x5ba/0x870 proc_sys_call_handler+0x31d/0x480 ? __pfx_proc_sys_call_handler+0x10/0x10 ? selinux_file_permission+0x39f/0x500 ? lock_is_held_type+0x9e/0x120 vfs_write+0x98e/0x1000 ... </TASK> The buggy address is located 0 bytes to the right of allocated 4096-byte region [ffff88800de56000, ffff88800de57000) With this fix applied, rerunning the same sysctl-targeted path yields no corresponding KASAN reports. Signed-off-by: Zilin Guan <zilin@seu.edu.cn> Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20260603105317.944304-2-dawei.feng@seu.edu.cn Signed-off-by: Alexei Starovoitov <ast@kernel.org>

andy-shev and others added 30 commits February 20, 2024 13:29

Merge branch 'mm-nonmm-unstable' into mm-everything

e36e2a3

Merge branch 'docs-fixes' into docs-mw

920290f

Bring the PDF build fix into docs-next so we can ... build PDFs

Merge branch 'mm-hotfixes-unstable' of git://git.kernel.org/pub/scm/l…

664842a

…inux/kernel/git/akpm/mm

Merge branch 'for-next/fixes' of git://git.kernel.org/pub/scm/linux/k…

e674e40

…ernel/git/arm64/linux

Merge branch 'arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel…

037abe5

…/git/soc/soc.git

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel…

5c25bbc

…/git/geert/linux-m68k.git

Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git…

72ca0b9

…/powerpc/linux.git

Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git…

f7deaba

…/s390/linux.git

Merge branch 'main' of git://git.kernel.org/pub/scm/linux/kernel/git/…

37770ce

…netdev/net.git

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/gi…

a1baded

…t/bpf/bpf.git

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/gi…

d40107c

…t/klassert/ipsec.git

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/…

f7260ac

…git/wireless/wireless.git

Merge branch 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/gi…

98a6b12

…t/rdma/rdma.git

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel…

46ef362

…/git/tiwai/sound.git

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel…

ca08189

…/git/broonie/regulator.git

Merge branch 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel…

409eaea

…/git/gregkh/tty.git

Merge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel…

3391fc0

…/git/gregkh/usb.git

Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git…

2d416d3

…/phy/linux-phy.git

Merge branch 'counter-current' of git://git.kernel.org/pub/scm/linux/…

bd1d202

…kernel/git/wbg/counter.git

Merge branch 'char-misc-linus' of git://git.kernel.org/pub/scm/linux/…

44dfda3

…kernel/git/gregkh/char-misc.git

Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git…

5815c44

…/westeri/thunderbolt.git

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/gi…

5cbf536

…t/herbert/crypto-2.6.git

Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git…

6979c3b

…/vkoul/dmaengine.git

Merge branch 'mtd/fixes' of git://git.kernel.org/pub/scm/linux/kernel…

eda6837

…/git/mtd/linux.git

Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git…

cfeea18

…/cxl/cxl.git

Merge branch 'next-fixes' of git://git.kernel.org/pub/scm/linux/kerne…

5b060e0

…l/git/kdave/linux.git

Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git…

2fbd341

…/viro/vfs.git

mdroth force-pushed the snp-host-latest branch from 05b1014 to 85ef1ac Compare August 19, 2024 19:33

mdroth force-pushed the snp-host-latest branch from 85ef1ac to 68799c0 Compare October 10, 2025 19:54

Navigation Menu

Uh oh!

Snp host latest - #6

Snp host latest#6
MelodyHuibo wants to merge 1985 commits into
AMDESE:snp-host-latestfrom
MelodyHuibo:snp-host-latest

MelodyHuibo commented Jun 5, 2024

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

12 participants

Uh oh!

Conversation

MelodyHuibo commented Jun 5, 2024

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

12 participants