Repository navigation
Conversation
…in feet (#1197) * docs: Apollo mmWave 2.3.0 dashboard guides and screenshots Update the setup and tuning guides for Apollo mmWave 2.3.0: the Start here card, the Radar setup cards (gate radar and LD2450), locked sliders with Unlock, the Device card, the 24 hour occupancy history, gate rows named by distance, Any zone, and resets that ask first. The zone map section covers the fitted 120 degree view and its range caption, feet or meters with the m / ft switch, the Locked button that also locks Cone rotation, and the Zone presence, LD2450 Live and LD2450 Controls cards. Troubleshooting adds an empty or single-dot map, the 2.2.7 inches fix, locked sliders and the support file. Replace the Start here, Controls and zone map screenshots and add screenshots of the Radar setup, Detection Range, Still Thresholds, Device and LD2450 Live cards, plus a slider lock clip. The MTR-1 wrapper's intro no longer calls the zone map the whole tab. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs: Zone Type notes for the Apollo mmWave zone map Apollo mmWave 2.3.0's Radar setup card recommends Zone Type Disabled, because the zone map replaces the LD2450's built-in zones. On Detection with no built-in zones set, the radar reports nobody. The R PRO-1 zone pages and the MTR-1 HLK page now say to leave Zone Type on Disabled (Close detection in the HLK app) when drawing zones on the dashboard. The MTR-1 zones page and both sensor definition pages are included by Homey pages, so they only gain the platform-neutral note that Detection with no zones set detects nobody. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs: Point the home page at the Apollo mmWave zone map The Radar & zones list linked to the standalone Zone Mapper beta, which the Apollo mmWave zone map has replaced. Link the zone drawing section of the Apollo mmWave dashboard guide instead. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs: Review fixes for the Apollo mmWave 2.3.0 guides Setup guide: "What to do first" now runs Dynamic Background Correction before calibrating on an R PRO-1, says to skip calibration without the LD2412 in step 2 instead of step 3, and nests the Auto-calibrate and dimmed Gate Energy screenshots under the steps they show. MTR-1 readers get a draw-zones link where the page only pointed at calibration, and a taken-control dashboard is said to miss the updated Start here steps. Tuning guide: label the Start here screenshot as the MSR-1 card, add the R PRO-1 background correction step before "Run a calibration", turn the walk test and the Cone rotation steps into numbered lists, and point MTR-1 readers to the LD2450 Radar setup section. The Device card now covers the MTR-1 (LD2450 firmware, no Firmware update row) and the "Restart device (also restarts the radar)" label, the R PRO-1 history names its LD2412 lines, and the tour's images sit under their bullets. Smaller fixes: R PRO-1 Start here stays at the top of the tab, the m / ft switch is in the bottom-right corner (undo sits next to it), "Use recommended settings" can replace the Multi Target Tracking button, and moving the sensor means redrawing zones as well. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs: Point zone pages at the Apollo mmWave zone map, keep Homey clean HLK app pages: the "Drawing zones with the Apollo mmWave dashboard?" tip now sits above step 4, so dashboard users pick Close detection before the step that selects Area Detection, and step 4's screenshot follows its own tip again. The R PRO-1 HLK page gets the same tip; no Homey page includes it. The MTR-1 Home Assistant zones tip now says to leave Zone Type on Disabled, like the R PRO-1 one. The orphan Homey copy of that page includes it by line range so it skips this Home Assistant-only tip. Choosing an mmWave sensor replaces the Zone Mapper beta tip with a pointer to the Apollo mmWave zone map. Its Homey copy now includes the page by line range and skips that tip; the rest renders unchanged. The Homey home page drops the Zone Mapper beta link, a Home Assistant HACS tool (Homey's Radar regions guides are listed below it), and the Zone Mapper pages say Apollo mmWave already has a zone map and to keep Zone Type on Disabled. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs: Address review: support file privacy note, Close detection in step 4, keep a chosen grid Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
|
Important Review skippedAuto reviews are disabled on base/target branches other than the default branch. 🗂️ Base branches to auto review: 1
Please check the settings in the CodeRabbit UI or the
 |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Publishes #1197 (Apollo mmWave 2.3.0 guides, Radar setup card, slider lock clip, zone map in feet, Zone Type tips on the R PRO-1 and MTR-1 zone pages, Homey pages kept free of the Home Assistant-only tips).
devcarries only that commit ahead ofmain.🤖 Generated with Claude Code